100 to 400 feet.
A well can be as deep as a 1000 feet in Florida, but most wells have a depth of 100 to 400 feet.
Contents
How deep is the water table in Florida?
The Floridan aquifer averages 1,000 feet thick, and freshwater can extend to a depth of 2,000 feet below land surface. Freshwater is thickest in the central portions of the state and rapidly thins toward the coast and the south.
How long does a well last in Florida?
A professionally installed well provides many years of safe, affordable water. ❖ Wells are easy to maintain. The pump and other mechanical parts of a well can last for 20 years or more.
Is it legal to drill your own well in Florida?
Yes, a well construction permit is required to construct a well. A Florida licensed water well contractor must apply for the permit before construction begins, and should provide the owner with a copy of the permit.
Do wells dry up in Florida?
But Florida never really dries out, and water gradually erodes the porous limestone to form cracks, passages, and vast underground spaces that fill with rain. This is the Floridan aquifer, the natural freshwater reservoir that underpins life in the Sunshine State.
Are we at risk of running out of freshwater in Florida?
Florida is running out of drinking water from the Floridan Aquifer, our main source of drinking water which has been relatively clean, cheap and plentiful — until now. The average Floridian uses about 158 gallons per day.Over-development has depleted the drinking water supply in most parts of Florida.
What percentage of Florida drinking water comes from groundwater?
Cities and towns, businesses and agriculture draw much of their water supplies from these aquifers. Supplying approximately 90 percent of the state’s drinking water, Florida’s aquifers supply more than 8 billion gallons of water each day; they are among the most productive in the world.
How deep can you dig in Florida?
If there is nothing there you can safely dig up to at least 25 feet without having to worry about any legal repercussions. Anything beyond that and you really will need to do research for your local area and find out if there is anything anyone owns mineral rights too in the area.
How much does a deep well cost in Florida?
A 100 foot well will run around $2,000-3,000 and a 400 foot well will average in the range of $6,000-12,000. This price will include the drilling, installation of the casing, and the well cap.
What is a good depth for a well?
In order to allow for maximum ground filtration to remove impurities, your well depth should be at least 100 feet. As a general rule, the deeper you drill, it’s more likely that there will be minerals present.
How much does it cost to put in a well and septic system in Florida?
The cost to put in a well and septic system ranges from $6,000 to $20,000 depending on the type of septic system, type of absorption field, size of the septic tank, and depth of well drilling required.
How far from a well can you build?
Buildings and Wells
In order to safely and effectively do this, access to the well is needed. In order to have access, and keep the well safe, a building, building addition, overhang, deck, canopy, or other structure may not be built over, or within 3 feet of any existing well.
How do wells work in Florida?
They are created by digging a hole in the ground with a shovel or backhoe. Dug wells have usually been excavated below the groundwater table until incoming water exceeded the digger’s bailing rate. The well was then lined (cased) with stones, brick, tile, or other material to keep it from collapsing.
What’s wrong with Florida’s water?
Ongoing water pollution and harmful algal blooms, including red tides and toxic blue-green algae, are putting public health at risk and causing massive die-offs of fish, marine life and sea turtles.For instance, cyanobacteria proliferate in the nutrient-rich fresh waters of Lake Okeechobee in Central Florida.
How safe is well water in Florida?
The majority of these wells produce water that tastes good and is free of harmful contaminants. Unfortunately, certain chemicals and bacteria that may cause disease have been found in some wells in Florida.
Is Florida drinking water safe?
Yes, the water in Florida is safe to drink because local governments follow strict federal and state laws on monitoring water contaminants.These standards insure that there are no harmful chemicals inadvertently added to the drinking water supply.”
Where is the best drinking water in Florida?
The city of Tallahassee’s drinking water has been declared the best in the state of Florida.
How much of Florida is swamp?
About 55 percent of the freshwater wetlands in Florida are forested, 25 percent are marshes and emergent wetlands, 18 percent are scrub-shrub wetlands, and the remaining 2 percent are freshwater ponds.
How does Florida get drinking water?
Florida’s water supply comes from the bountiful systems of rivers, streams, wetlands, lakes, springs, aquifers and estuaries across the state.Additionally, Florida’s natural environment also needs sufficient water supply to function properly.
Where is 76% of the Earth’s freshwater found?
Over 68 percent of the fresh water on Earth is found in icecaps and glaciers, and just over 30 percent is found in ground water. Only about 0.3 percent of our fresh water is found in the surface water of lakes, rivers, and swamps.
Can you drink aquifer water?
Most of the time, U.S. groundwater is safe to use. However, groundwater sources can become contaminated with germs, such as bacteria, viruses, and parasites, and chemicals, such as those used in fertilizers and pesticides. Contaminated groundwater can make people sick.
