A well can be as deep as a 1000 feet in Florida, but most wells have a depth of 100 to 400 feet. The more the depth of a well, the more its cost.
Contents
How deep is the water table in Florida?
The Floridan aquifer averages 1,000 feet thick, and freshwater can extend to a depth of 2,000 feet below land surface. Freshwater is thickest in the central portions of the state and rapidly thins toward the coast and the south.
How deep are residential wells?
In general, private home wells tend to range from 100 to 500 feet in depth. However, they can be much deeper than this in some cases. There are even some wells that go past the 1,000 foot mark. The average well depth in your area will depend on several factors.
How long does a well last in Florida?
A professionally installed well provides many years of safe, affordable water. ❖ Wells are easy to maintain. The pump and other mechanical parts of a well can last for 20 years or more.
Can I drill my own well in Florida?
All wells must be constructed by a licensed water well contractor. The only exception to this law is for a water well two (2) inches or less in diameter constructed by an individual for his/ her own private use on his/her owned or leased property as specified in Section 373.326(2), Florida Statutes.
Do wells run dry in Florida?
Since 1999, the Biscayne Aquifer has lost 580 square miles of its supply for 4 million residents, more than half the population in Southeast Florida. Water remains drinkable, but the water quality is concerning due to some contaminated coastal sites.
How deep do you have to dig to hit water?
You will need to dig at least 30 feet below the surface to find high-quality water. But you’ll need to dig even deeper to find better water that will be the safest for your family to drink.
How deep is water line from well to house?
Water supply lines connect the household plumbing to the local mains water supply or sometimes to a well in rural areas. The lines run at least 3 feet below ground, which can make them difficult to find.
What is the best depth for a well?
In order to allow for maximum ground filtration to remove impurities, your well depth should be at least 100 feet. As a general rule, the deeper you drill, it’s more likely that there will be minerals present.
How do well drillers know where to drill?
If you want to find the the location to drill with the highest potential yield you need find the location to drill that the aquifer is the thickest and has the highest hydraulic conductivity. Using seismic technology and software customized for imaging aquifers we are able to find this for you before drilling.
How much does a deep well cost in Florida?
A 100 foot well will run around $2,000-3,000 and a 400 foot well will average in the range of $6,000-12,000. This price will include the drilling, installation of the casing, and the well cap.
How do well digger’s find water?
If there are no wells in the area, or not enough information is available on existing ones, the hydrologist may contract with a well driller to put down some test holes. At these holes a pumping or aquifer test will be conducted. These tests indicate the water-bearing properties of the aquifer tapped by the well.
Is well water safe to drink?
Well water can be safe for drinking and all other household needs, as long as you make sure to test your water supply regularly and select treatment solutions in line with your results. Learn more about the well water treatment options that are available for your specific needs.
What is a shallow well in Florida?
Shallow wells — wells less than 50 feet deep — are typically used for lawn irrigation.One pump is used to pump water from the well to the aerator, and the other pump is used to pump water from the aerator to the house.
How much does it cost to put in a well and septic system in Florida?
The cost to put in a well and septic system ranges from $6,000 to $20,000 depending on the type of septic system, type of absorption field, size of the septic tank, and depth of well drilling required.
How deep should a shallow well be?
A shallow well, also called a dug well, is less than 50-feet deep and constructed above the bedrock.
Are shallow wells safe?
Shallow and older wells may have a higher risk of contamination. Wells less than 100 ft deep lack the soil thickness to adsorb contaminants seeping into the ground, while older wells may not have a good seal around the well casing, a watertight cap, or may not have a well casing that extends above ground.
How deep are irrigation wells?
Most household water wells range from 100 to 800 feet deep, but a few are over 1,000 feet deep. Well yields can be increased by fracturing the bedrock immediately around the drill hole and intercepted rock faults.
Can you drill existing well deeper?
Well deepening is re-drilling into an already existing well in order to find a deeper more productive reservoir. Sometimes a previously unproductive well can be deepened in order to reach a location with higher flow and temperature.
How deep can you dig in North Port Florida before hitting water?
There is no legal minimum depth that you can dig before calling 811. This is due to the fact that environmental conditions such as ground settlement, rainfall, floods, surface runoff, soil erosion and deposits can change the depth of topsoil, reducing or increasing the cover for underground services.
How long do wells last?
The average lifespan for a well is 30–50 years. 2. How deep is the well? Drilled wells typically go down 100 feet or more.
