The context is an area formerly zoned single-fam- ily with various existing single-family homes. New homes range in size from 1,050 to 1,800 square feet. The RSL zone would encourage more “missing middle” housing that is in between the density of Seattle’s and single-family and multifamily zones.
Contents
What is RSL lot?
010 Description and intent. The RSL residential small lot single-family zoning district is established as a land use district for single-family residential dwellings on smaller lots, where public water and sewer services are available.
What does sf5000 mean?
5,000 sf. Areas characterized by houses, also known as detached single-family dwelling units, on lots of a compatible scale and character. The SF 5000, SF 7200, and SF 9600 zone designa- tions correspond to the minimum lot size required for each single-family dwelling unit. Design Standards.
What is the minimum lot size in Seattle?
5,000 square feet is the minimum lot size required for each detached structure. An area within an urban village that allows for the development of smaller detached homes that may be more affordable than available housing in single family zones.
How much of Seattle is zoned single-family?
Single-family zones, which as of next month will be known as neighborhood residential zones, comprise nearly half of all developable land within Seattle’s boundaries, and nearly three-quarters of residential areas.
What does RSL stand for in real estate?
The following Realty Services Letters (RSLs) are currently in effect.
What does RSL mean in housing?
Registered social landlord (RSL) is the technical name for social landlords that in England were formerly registered with the Housing Corporation, or in Wales with the Welsh Government.
How close can you build to property line Seattle?
If you’re moving your property line, the line’s new location should be at least 5 feet from your single-family home, garage, and related buildings. In most cases, your buildings’ walls and eaves must be fire rated if they are less than 5 feet from your property line’s new location.
What is SF 5000 zoning Seattle?
The land use code classification that is applicable to most single family homes in Seattle is known as SF5000 (and SF7200 and SF9600 for larger lots). The “SF” means: Single Family. The 5000 means the property is more or less 5000 square feet.
What is ra5 zoning in King County WA?
RA 2.5 and RA 5 means one residential home per 5 acres (it’s way too complicated to explain why RA 2.5 is also one home per 5 acres). These lands are not zoned for commercial use; they are zoned primarily for residential use, with some exceptions.
How high can you build a house in Seattle?
The base height of homes (principal structures) is 30 feet above average grade (23.44. 012). On lots 30 feet or less in width, the base height is limited to 25 feet (detailed measurement techniques are found in Chapter 23.86 of the Land Use Code and in Director’s Rule 9-2011).
What defines a single family home?
A single-family home is a free-standing residential building. Single-family homes are designed to be used as a single-dwelling unit, with one owner, no shared walls, and its own land.
What does zoning SF mean?
The intent of the single-family one (SF-1) district is to maintain and create an environment which meets the community needs for single-family dwellings with small accessory apartments, by restricting other uses within the district and by establishing a minimum lot size. (
How many single family homes are in Seattle?
Seattle’s average household size of 2.08 persons is the smallest among the 100 largest cities in the nation. [1] Of a total of 258,499 households in Seattle, over 105,000 (41%) are single persons living alone, compared to only 46,310 households (18%) with children 18 or under.
How is Seattle far calculated?
Floor area ratio (FAR) is the measurement of a building’s floor area in relation to the size of the lot/parcel that the building is located on. FAR is expressed as a decimal number, and is derived by dividing the total area of the building by the total area of the parcel (building area ÷ lot area).
How Minneapolis became the first to end single family zoning?
Minneapolis is also grappling with an affordable housing crisis amplified by a lack of housing options, particularly smaller residences suitable for first-time buyers and those looking to downsize. These “missing middle” properties include duplexes, triplexes, cottage courts, and small apartment buildings.
What is RSL value?
RSL readings are an indicator of how well the radio can “hear” information being transmitted from the far end radio. The numbers are always preceded by a minus (-) sign. An example of an RSL reading would be -35. The closer to zero the reading is, the stronger the signal will be.
What does RLS stand for?
Restless legs syndrome (RLS) is a condition that causes an uncontrollable urge to move your legs, usually because of an uncomfortable sensation. It typically happens in the evening or nighttime hours when you’re sitting or lying down.
What does LT stand for on property?
When you create a lifetime estate, you give someone the right to occupy and use the property during his lifetime. This person is called a “life tenant.” When the life tenant dies, the life estate terminates, and another person acquires full title to the property.
What is the difference between a housing association and council?
Housing associations rent their properties through the council and sometimes you can go directly to them. A council tends to offer a Secured Tenancy with a Right To Buy your council house. A Housing Association offer Assured Tenancy agreements and you will usually have a Right To Acquire your home at a discount.
Social housing in Scotland is housing owned and managed by public authorities (mainly councils) and housing associations (registered social landlords or RSLs).So we support social landlords to provide affordable accommodation, allocated according to need.
